Korg Electric Keyboard manual Combi 4.1 Ed-MIDI Filter1, Combi 4.2 Ed-MIDI Filter2

COMBI 4.1: Ed–MIDI Filter1

These settings allow you to apply filters to the MIDI data that will be transmitted and received by each timbre 1–8. For example even if two timbres are being played by the same MIDI channel, you can make settings so that the damper pedal will apply to one but not the other.

On (checked): Transmission and reception of MIDI data is enabled.

When “Status” (3.1–1a) is INT, operations of the built-in controllers or incoming MIDI data will apply the effect of the checked item to the program of the corresponding tim- bre. (The effect dynamic modulation function is not affected by this setting.)

When “Status” is EXT or EX2, operations of the built-in con- trollers will transmit MIDI data on the channel of that tim- bre. MIDI transmission and reception settings for this instrument are made in “MIDI Filter” (GLOBAL 2.1–1b). The MIDI Filter 3 and MIDI Filter 4 pages contain MIDI fil- ters for assignable controllers (whose function can be set by the user), and if these are assigned to MIDI control changes, the filter settings will affect those control changes.

In this case, if the assignable controllers have been set to control changes that are also found in the MIDI Filter 1 or MIDI Filter 2 pages, the settings in the MIDI Filter 1 and MIDI Filter 2 pages will take priority. Also, if the same con- trol change is assigned to two or more controllers in the MIDI Filter 3 and MIDI Filter 4 pages, checking any one of them will enable that control change.

Off (unchecked): Transmission and reception of MIDI data is disabled.

4.1–1: MIDI 1–1(MIDI Filter 1–1)

4.1–1a

4.1–1b

4.1–1a: Program Change, After Touch

Program Change [Off, On]

Specifies whether or not MIDI program change messages will be transmitted and received.

After Touch [Off, On]

Specify whether or not MIDI after touch messages will be transmitted and received.

■4.1–1b: UTILITY

☞“Write Combination,” “Solo Selected Timbre” (1.1–1c)

4.1–2: MIDI 1–2(MIDI Filter 1–2)

4.1–2a

4.1–2b

4.1–2a: Damper CC#64, Portamento SW CC#65

Damper CC#64 [Off, On]

Specifies whether or not MIDI control change message #64 hold (damper pedal) messages will be transmitted and received.

Portamento SW CC#65 [Off, On]

Specifies whether or not MIDI control change message #65 portamento on/off messages will be transmitted and received.

■4.1–2b: UTILITY

☞“Write Combination,” “Solo Selected Timbre” (1.1–1c)

COMBI 4.2: Ed–MIDI Filter2

4.2–1: MIDI 2–1(MIDI Filter 2–1)

4.2–1a

4.2–1b

4.2–1a: JS+Y CC#01, JS–Y CC#02

JS+Y CC#01 [Off, On]

Specifies whether or not MIDI control change #1 (the +Y axis of this instrument’s joystick, or specified as the “B” assign- ment of a REALTIME CONTROL knob) will be transmitted or received.

JS–Y CC#02 [Off, On]

Specifies whether or not MIDI control change #2 (the –Y axis of this instrument’s joystick, or specified as the “B” assign- ment of a REALTIME CONTROL knob) will be transmitted or received.

■4.2–1b: UTILITY

☞“Write Combination,” “Solo Selected Timbre” (1.1–1c)

7.2 7.1 6.1 4.4 4.3 4.2 4.1 3.4 3.3 3.2 3.1 2.2 2.1 1.1 COMBI

41