Korg Electric Keyboard Master EQ, Individual Outputs, Controlling the Master Effects via, 162

4. Controlling the Master Effects via

MIDI

You can use the Dynamic Modulation (Dmod) function to control all Master Effects parameters in real-time from this instrument’s controllers or from an external MIDI sequencer.

In Program mode, the parameters are controlled on global MIDI channel “MIDI Channel” (GLOBAL 2.1–1a).

In Combination mode, and Sequencer mode, you can set the control channels for MFX1 and MFX2 using the Setup page “Control Channel” parameters of the “MFX1–2” tabs. Select the desired option from Ch01–16, and Gch.

Ch01–16:Select this option if you wish to control the param- eters for each Master Effect on different channels.

Gch: Select this option if you wish to control the parameters on global MIDI channel “MIDI Channel” (GLOBAL 2.1–1a). This is the normal setting.

Master EQ

The Master EQ (stereo, three-band EQ) is located right before AUDIO OUTPUT (MAIN) L/MONO, R. Low and High EQs are of the shelving type, and Mid EQ is a peaking type equalizer. You can control the Low Gain and High Gain parameters using the Dynamic Modulation function.

The Master EQ (stereo, three-band EQ) is applied to the sig- nal input from the L/R bus. For more information on the parameters, p.209.

Individual Outputs

The TRITON Le is equipped with two individual AUDIO OUTPUTs (INDIVIDUALs). You can route the oscillator (Program), timbre (Combination), and track (Sequencer) output or the post-IFX signals to these two individual out- puts.

Use “BUS Select” (7.1–1a) in Program, Combination, or Sequencer mode to route the oscillators (Program), timbres (Combination), or tracks (Sequencer) to AUDIO OUTPUTs (INDIVIDUAL).

If you are using the Insert Effects, use “BUS Select” of the 7.1: Ed–InsertFX (or Insert FX), and Setup page to route the post-IFX signals.

1, 2: Monaural signals are routed to AUDIO OUTPUTs (INDIVIDUAL).

1/2: Stereo signals are routed to AUDIO OUTPUTs (INDI- VIDUAL).

Program mode

Effect / Mixer Block Diagram in Program Mode
			PROG 7.1: Insert Effect					PROG 7.2: Master Effect
	IFX / Indiv.Out
Pan	BUS Select						Send1 Send2		L/R BUS
Oscillator 1	BUS Select
Oscillator 2	= IFX
AUDIO INPUT 1	BUS Select
	= L/R
AUDIO INPUT 2	BUS Select
	= IFX
							GLOBAL 1.1: System Audio In*1
GLOBAL 1.1: System Audio In*1					Post IFX		(Send1,2 on Input1, 2)				AUDIO OUTPUT
(Input1,2)							Post IFX		stereo	Master EQ
				Insert Effect	Pan(CC#8)	BUS Select					(MAIN) L/MONO, R
							Send1 / 2
	Select from:	IFX BUS	stereo	IFX		BUS Select
	L/R					= L/R
	IFX
	1					Select from:
	2					L/R
	1/2					1
	Off					2
						1/2
						Off
							Chain	Master Effects	Return1 / 2
							mono	MFX1	stereo
*1: Sold separately EXB-SMPL option is installed							mono	MFX2
									stereo
		mono x 2					mono x2
											AUDIO OUTPUT
											(INDIVIDUAL)1/2

162