About Your Projector Remote control | Panasonic TQBJ0303-1 instruction

About Your Projector

Remote control signal emitters

Press the tab and lift up the cover. Insert the batteries according to the polarity diagram indicated inside.

Preparation

Front view
JJ
POWER button	Detect the input signal and the
Switch between stand-by	setting of SHIFT, DOT CLOCK
mode and projection mode.	and CLOCK PHASE in POSITION
(Æpage 23, 24)	menu will be adjusted automati-
Switch the required input signal button to	cally for COMPUTER signals.
select.	(Æpage 27)

	(The NETWORK button is only for PT-LB90NTE)	The PAGE buttons are only for
	(See CD-ROM contents.)	PT-LB90NTE.
	(Æpage 26)	PT-LB90NTE.
	(Æpage 26)	(See CD-ROM contents.)
	Display the main menu.	(See CD-ROM contents.)
	Display the main menu.	Turn off the projection temporarily.
	(Æpage 30)	Turn off the projection temporarily.
	Navigate through the menus with the	(Æpage 26)
	▲▼◄►buttons, and activate the menu	Display the frozen image while
	item with ENTER button.	the display of subsequent images
	(Æpage 29)	continues.
	Capture the projected image as a frozen	(Æpage 27)
	picture.	The COMPUTER SEARCH button
	(Æpage 26)	The COMPUTER SEARCH button
	Reset some of the settings to the	is only for PT-LB90NTE.
	factory default settings.	(See CD-ROM contents.)
	factory default settings.
	(Æpage 27)	Assign a useful function for a
	The MULTI-LIVEbutton is only for	shortcut.
	PT-LB90NTE.	(Æpage 28, 43)
	(See CD-ROM contents.)	Control to adjust the volume of the
	Control to change the scale by	speaker.
	means of digital zoom.	(Æpage 27)
	(Æpage 28)

Note

zzDo not drop the remote control.

zzAvoid contact with liquids or moisture.

zzDo not attempt to modify or disassemble the remote control. zzDo not mix old and new batteries or batteries of different types.

Use only manganese batteries or alkaline batteries with the remote control. zzDo not swing the strapped remote control.

Remarks

Attaching a hand strap You can attach a favourite strap onto the remote control.

zzDo not let strong light shine onto the signal receptor.

The remote control may malfunction under strong light such as fluorescent.

zzYou can operate the projector with the remote control within the remote range of 15 m (49'2"), approximately ±30 ° vertically and horizontally.

zzIf there are any obstacles between the remote control emitter and the remote control signal receptor, the remote control may not operate correctly.

The operating range may differ due to the screen material, and this function may not be effective with a translu- cent screen.

16 - ENGLISH