Remote control operation
26 - ENGLISH
Basic Operation
Remote control operation

Capturing an image

You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
Press button.
Press the FREEZE button again to escape.

Stopping the projection

temporarily

You can stop the projection and audio sound through
the projector temporarily.
Press button.
Press the AV MUTE button again to escape.

Switching the input signal

You can switch the input signal corresponding to the
computer to be projected.

COMPUTER

J
Press button.
Press the COMPUTER button to cycle through the
options.
COMPUTER1
Signal input to
COMPUTER1 IN
terminal
COMPUTER2
Signal input to
COMPUTER2 IN
terminal
JNETWORK (PT-LB90NTE only)
Press button.
NETWORK
Signal transmitted by “Wireless
Manager” from computer through
network (Æpage 47)

VIDEO

J
Press button.
Press the VIDEO button to cycle through the options.
S-VIDEO Signal input to S-VIDEO IN
terminal
VIDEO Signal input to VIDEO IN terminal
If INPUT GUIDE under the ON-SCREEN DISPLAY
in the DISPLAY OPTION menu is set to DETAILED
(Æpage 38),youcanconrmtheselectedinput
terminal in the graphical input terminal guide at the
upper right of the screen. (Highlighted in yellow is the
selected terminal.)
Youcanchangetheinputwith▲▼◄►buttons.
It may take some time to change the image after the
input signal is switched.
Note
Input a compatible signal shown in the “List of
z
compatible signals”. (Æpage 54)
Remarks
For the input terminals, see “Connections”.
z
(Æpage 19)
If no operation is performed, the input guide
z
disappears automatically.
If the
zINPUT SELECT button on the control panel is
pressed, the input is switched in the following order.
(Æpage 14)
COMPUTER1 COMPUTER2 S-VIDEO
NETWORK *1VIDEO
PT-LB90NTE only*1: