Panasonic TQBJ0303-1 Picture Mode, Contrast, Brightness, Color, Tint, Sharpness, White Balance

Settings

PICTUREmenumenu

Navigating through the MENU (Æpage 29), select PICTURE from the main menu and then select the required item from the sub-menu.

zzSet the selected item with ◄►buttons.

Remote control Control panel

PICTURE MODE

Depending on the projection environment, you can optimize the image projection.

Change setting Change setting

Press◄►buttons to cycle through the options.

STANDARD DYNAMIC

NATURAL	WHITE BOARD	BLACKBOARD
STANDARD	Setting for general image
DYNAMIC	Setting for brightness and
	sharpness
BLACKBOARD	Setting for when projecting on a
	blackboard
WHITE BOARD	Setting for when projecting on a
	white board
NATURAL	Reproducing the original colour of
	the image

Remarks

zzIt may take a while until the selected mode is stabilised.

CONTRAST

You can adjust the contrast of the projected image.

Lower Higher

BRIGHTNESS

You can adjust the brightness of the projected image.

Darker Brighter

COLOR

You can adjust the colour saturation of the projected image. (Available with signals of S-VIDEO/VIDEO/ RGB (Moving image)/YPBPR only)

Lighter Darker

TINT

You can adjust the skin tone in the projected image. (Available with signals of S-VIDEO/VIDEO/RGB(Moving image)/YPBPR only)

More reddish More greenish

SHARPNESS

You can adjust the sharpness of the projected image.

Less sharp More sharp

Remarks

zzThe adjustable range depends on the input signal.

WHITE BALANCE

You can adjust the white balance more properly in 3 colours temperature.

(Available with signal of RGB (Still image) only)

-1 +1

Press▲▼buttons to cycle through the options.

Advanced menu item		Default
WHITE BALANCE	RED	0
WHITE BALANCE  GREEN		0
WHITE BALANCE	BLUE	0

COLOR TEMPERATURE

You can adjust the white balance of the projected image.

Change setting Change setting

DEFAULT		HIGH	LOW
DEFAULT	Balanced white
HIGH	More bluish
LOW	More reddish

32 - ENGLISH