Panasonic TQBJ0303-1 manual Function Button, Audio Setting

FUNCTION BUTTON

You can select a useful function from the list and assign it to the FUNCTION button as a short-cut.

1111 Press the MENU button of the control panel or remote control to display the on screen menu (main menu, sub- menu or detailed menu).

For the menu operation, see “Navigating through the MENU”. (Æpage 29)

2222 Press and hold the FUNCTION button of the control panel or remote control for at least 3 seconds.

QQWhen not using the FUNCTION button

1111 Select DISABLE in this menu (FUNCTION BUTTON in the PROJECTOR SETUP menu).

2222 Press the ENTER button.

3333 Select OK.

4444 Press the ENTER button.

Remarks

zzAfter the setting is completed, the text colour and button colour will change.

zzYou can assign all the menu items, excluding the sub-menu of the SECURITY menu (PASSWORD,

PASSWORD CHANGE, TEXT DISPLAY, TEXT CHANGE, MENU LOCK, MENU LOCK PASSWORD and CONTROL DEVICE SETUP).

zzThe displayed menu screen will disappear after 5 seconds without any operation, and the setting will be confirmed.

AUDIO SETTING

You can perform more detailed setting for Audio.

JJVOLUME

You can adjust the volume of the built-in monaural speaker and VARIABLE AUDIO OUT terminal.

-1 +1

JJBALANCE

You can adjust to hear the sound played equally through both right and left external stereo speakers, or shift the balance so more sound plays through the left or right side.

Left Right

PROJECTOR SETUP menu

JJIN STANDBY MODE

You can turn ON or OFF the audio output in the standby mode.

Change setting Change setting

OFF	Deactive
ON	Active

Remarks

zzWhen STANDBY MODE is set to ECO, the audio output cannot be activated in the standby mode.

JJPOWER BUTTON BEEP

You can set the operational sound (beep) heard when the power is turned off/on.

Change setting Change setting

OFF	When the power is turned off/on *, the
	operational sound (beep) is not heard.
ON	When the power is turned off/on, the
	operational sound (beep) is heard.

¸¸¸ The operational sound is heard when the button on the control panel is pressed after the power is connected.

JJAUDIO IN SELECT

You can select to connect the audio input of the devices connected to COMPUTER1/COMPUTER2 to the COMPUTER AUDIO IN or AUDIO IN terminal.

Change setting	Change setting
AUDIO IN SELECT
COMPUTER1 IN	Select COM. AUDIO IN or
	AUDIO IN terminal
COMPUTER2 IN	Select COM. AUDIO IN or
	AUDIO IN terminal

Settings

ENGLISH - 43