12
Installation of the USB Driver
First, PC is started, and then Windows is started.
The CD-ROM with USB driver software is inserted into the
CD-ROM drive.
Next, touch panel and PC are connected with a USB cable.
(see page 10)
When a USB cable is connected, “Add New Hardware
Wizard” is indicated.
1 Click on this button.
2 Next, choose this item.
3 Click on this button.
4 Next, choose this CD-ROM drive.
5 Click on this button.
The following screen is displayed when the driver file on
the CD-ROM is found and is ready to be copied.
6 Click on this button.
Then, the driver file is copied and set up.
Install USB Driver
In case of Windows 98 / SE