17
“Driver Files Search Results” is indicated.
6 Click on this button.
Driver software is set up, and “Completing the Found New
Hardware Wizard” is indicated.
7 Click Finish to close this wizard.
1 Click on [Start] [Settings] [Control Panel]
Double-click on “the system” icon of the control panel,
and open the properties of the system.
2 The properties of the system opens, click on the
“Hardware” tab. Then click on the “Device Manager”
button.
3 Double-click “Ports [COM&LPT]”.
Confirm that “MATSUSHITA USB-Serial Bridge for Touch
Panel (COMx)” is found in “Ports [COM&LPT]”.
(COMx) is the COM port number for using a touch panel.
As for the COM port number, the setup number varies in
the use environment of the PC.
The setup of the USB driver is finished.
Installation of the USB Driver
COM port number is confirmed with “Device Manager”