Manuals / Panasonic / Communications / Telephone

Panasonic VA-30942D, VA-824, VA-30940D, VA-30920, VA-30910, VA-30941D, VA-30960 Settinq, To release

Models: VA-30910 VA-824 VA-123210 VA-30942D VA-1232 VA-12021 VA-20861 VA-12022 VA-30960 VA-12022B VA-30941D VA-30940D VA-12020 VA-30965 VA-30920 VA-82110 VA-309

1 43

Download 43 pages 18.98 Kb

Page 23

All incoming outside and intercom calls can be routed to set extension.

This feature can be set for each telephone separately and while it is set the DNDKF indicator light up.

Note that this indicator also lights up when the Do-Not-Disturb feature is set.

Settinq

1.Press ON/OFF key

*Listen for the intercom dial tone from speaker.-ON/OFF -. ’ indicator will light up.

2.Press dial keys #3

3.Press the extension number for forwarding

4.Press dial key #

*DNDICF indicator will light up.

5.Press ON/OFF key

*ONIOFF indicator will go off.

To release

1.Press ON/OFF key

2.Press dial keys #2#

*DNDICF indicator will go off

3.Press ON/OFF key

22

-;

:

Image 23

Panasonic VA-30942D, VA-824, VA-30940D, VA-30920, VA-30910, VA-30941D, VA-30960, VA-30965, VA-82110, VA-20861 Settinq, To release

Contents

E r a t i n g Instructions COL Table of Contents Toll Restriction Pause Function Flash Function Signal Conversion from pulseCase of a Power Failure Intercom Dial Tone Mute SpeakerphonePage 18-f @iI Press any available line key To store a number To save a numberTo make a call To erase a number stored To make a call \I To store a number from extension 10 only To erase a stored number from extension 10 only To make a call Pickinq up held line To answer a call on a telephone which ringsTo answer a call on a telephone which does not ring Putting call on hold If the extension is busy Transferrinq a call to another extensionAlternatively Three-party conference Line indicator will flash greenPage BEI If MIC key is not pressesd To release hold Putting an intercom call on hold Conf For VA-824 LJON/OR Features are stored as follows When using FF key To release Settinq Press ON/OFF key Storing To erase stored number One-touch operation IEI EaON/OR When dialinq Call is transmitted by tone signals Answering Calling Setting time from extension 10 only To release alarm setting Settinq alarm Confirminq number Dial number displayDisplay during call Other cases Optional Equipment To answer telephone which does not ring To release door lock To silence an alarm on telephoneTo silence an alarm on sensor To enter an account number and dial To call an extension while talking with another extension To transfer an outside call to an extension You will bear the intercom dial tone from handset Dimensions Inch Heigh x Width x Depth, Weight Pound Page Receiving and Following Th?@i% ‘cr ‘-‘ Storing and Setting Press El one-touch key Ress Conf