Manuals / Panasonic / Communications / Telephone

Panasonic VA-30910, VA-824, VA-30940D, VA-30920, VA-30941D Features are stored as follows, Ljon/Or

Models: VA-30910 VA-824 VA-123210 VA-30942D VA-1232 VA-12021 VA-20861 VA-12022 VA-30960 VA-12022B VA-30941D VA-30940D VA-12020 VA-30965 VA-30920 VA-82110 VA-309

1 43

Download 43 pages 18.98 Kb

Page 21

Vacant line keys can be used to enable one touch access to system features.

All features can be stored with the exception of the fjxed functions HOLD, FLASH, SAVE, REDIAL, CONF and ON/OFF. Up to 8 digits can be stored under edch keys.

Note that even if “0” is stored, you cannot call the extension IO (operator call).

Features are stored as follows

Extension number:

ON/OFF

IEl

+

AUTO

IEI

aHOLD

LJON/OR

1.Press ON/OFF key

*Listen for the intercom dial tone from speaker. The ON/OFF indicator will light up.

2.Press AUTO key.

3.Press FF key

4.Press the extension number for storing

5.Press HOLD key

6.Press ON/OFF key

*ON/OFF indicator goes off

20

Image 21

Panasonic VA-30910, VA-824, VA-30940D, VA-30920, VA-30941D, VA-30942D, VA-30960, VA-1232 Features are stored as follows, Ljon/Or

Contents

E r a t i n g Instructions COL Table of Contents Case of a Power Failure Pause Function Flash Function Signal Conversion from pulseIntercom Dial Tone Mute Speakerphone Toll RestrictionPage 18-f @iI Press any available line key To save a number To make a callTo store a number To erase a number stored To make a call \I To store a number from extension 10 only To erase a stored number from extension 10 only To make a call To answer a call on a telephone which does not ring To answer a call on a telephone which ringsPutting call on hold Pickinq up held line Transferrinq a call to another extension AlternativelyIf the extension is busy Three-party conference Line indicator will flash greenPage BEI If MIC key is not pressesd To release hold Putting an intercom call on hold Conf For VA-824 LJON/OR Features are stored as follows When using FF key To release Settinq Press ON/OFF key Storing To erase stored number One-touch operation IEI EaON/OR When dialinq Call is transmitted by tone signals Answering Calling Setting time from extension 10 only To release alarm setting Settinq alarm Dial number display Display during callConfirminq number Other cases Optional Equipment To answer telephone which does not ring To silence an alarm on telephone To silence an alarm on sensorTo release door lock To enter an account number and dial To call an extension while talking with another extension To transfer an outside call to an extension You will bear the intercom dial tone from handset Dimensions Inch Heigh x Width x Depth, Weight Pound Page Receiving and Following Th?@i% ‘cr ‘-‘ Storing and Setting Press El one-touch key Ress Conf