ADTRAN TSU IQ+, 1204002L2 user manual Features

Chapter 1. Introduction

Features

Features of the TSU IQ+ are:

•Complete and comprehensive frame relay monitoring, including Layer 3 protocol monitoring

•Real-time measurement of bandwidth utilization, committed information rates (CIRs), and excess burst rates on each PVC

•True non-intrusive, in-band transmission of statistics

•Embedded SNMP and Telnet through the DTE, network, or SLIP/PPP port (or through the optional ethernet interface)

•Control port provides SLIP and async PPP access to SNMP or VT-100 terminal configuration

•DSX-1 port provides short haul T1 interface for operation with a PBX

•Dial backup (DBU) available with DBU cards; options include 4-wire Switched 56 (SW56), V.34, PRI, and ISDN

•End-to-end network round trip delay measurements for network optimization

•10BaseT ethernet port available with ethernet card

•Frame IQ MIB is standard ANSI format compatible with popular enterprise reporting systems

•Optional IQ View™ software system provides a cost-effective, easy-to-use GUI (graphical user interface) for performance management

•Standard DTE (data terminal equipment) interfaces

The 4-wire SW56 DBU card is compatible with AT&T Accunet and Sprint SW56 type services. The V.34 DBU card allows switched backup over the public switched telephone network (PSTN). The ISDN 1 B+D card supports a U-interface to the basic rate ISDN and is compatible with National ISDN and AT&T DMS. The DSX-1 port complies with ANSI T1.102.

The PRI DBU card allows the TSU IQ+ to accept or place up to 23 dial backup calls simultaneously.

The TSU IQ+ provides a V.35 electrical and physical DTE interface to accommodate a variety of applications.

1-2 TSU IQ+ User Manual 61200275L1-1