ADTRAN 1204002L2, TSU IQ+ In-Band Management, Trap Manager IP Address, Trap Manager Port

Chapter 4. Applications

Trap Manager IP Address

Enter the IP address of the SNMP manager to which the TSU IQ+ sends traps. This selection is found under CONFIGURATION>

SYSTEM>TRAP MGR OPTIONS.

Trap Manager Port

Enter the TSU IQ+ port used to transmit traps to the SNMP manager. This selection is found under CONFIGURATION>

SYSTEM>TRAP MGR OPTIONS.

In-Band Management

The ADTRAN TSU IQ+ supports three modes of in-band management using the frame relay structure of PVCs. These modes are local, shared, and dedicated PVC management. All three types support complete SNMP management as well as Telnet capabilities.

All PVC-based in-band management traffic must be noncompressed IP and use RFC 1490 encapsulation.

Local PVC Management

Local PVC management refers to a PVC created between the TSU IQ+ and the frame relay router on the DTE (V.35) interface of the TSU IQ+ (see Figure 4-3 on page 4-6). This type of management is ideal when local management is needed but an ethernet connection is not available. To support this type of management, all traffic on the selected PVC must be RFC 1490 encapsulated, noncompressed IP traffic.

The local PVC is sent out of theWAN serial port of the router as normal WAN traffic and is terminated in the TSU IQ+. Since the TSU IQ+ responds to Inverse ARP, it is not necessary to set up a static route in the router. The router will discover the IP address automatically; however, it will be necessary to set up a local PVC between the router and the TSU IQ+. Accomplish this by setting a value (between 16 and 1007) for the DTE management DLCI on the TSU IQ+ to a value not used by the frame relay network.

61200275L1-1 TSU IQ+ User Manual 4-5