Chapter 7 Configuring the Network Port

NETWORK PORT

Access the NETWORK PORT menus by selecting NETWORK PORT from the CONFIGURATION menu. Full menu trees for the NETWORK CONFIGURATION selections are shown in Figure 5-2 on page 5-3 (Terminal Configuration Menu Tree) and Figure 5-3 on page 5-4 (Front Panel Configuration Menu Tree). The Network PORT terminates the user end of the frame relay UNI interface. The TSU IQ+ supports three standard PVC signaling formats: LMI (gang of four), ANSI T1.617-D (Annex D), and ITU Q.933-A (Annex A). The selected signaling format is used to poll the network end of the UNI interface and retrieve virtual circuit information. Optionally, the polling process can be disabled.

When configuring from a terminal, the screen in Figure 7-1 on page 7-2 will appear when NETWORK PORT is selected.

In this chapter, the terminal selections are listed first followed by the front panel selections in parentheses (if the names differ).

61200275L1-1

TSU IQ+ User Manual

7-1

Page 87
Image 87
ADTRAN 1204002L2, TSU IQ+ user manual Configuring the Network Port