ADTRAN 1204002L2, TSU IQ+ user manual Read Community RD Community, Write Community WR Community

Chapter 9. System Configuration

Read Community (RD COMMUNITY)

Enter the authentication strings used for SNMP management. Match the TSU IQ+ to the SNMP manager for read privileges. If using front panel entry, see the section Entering Letters Using the Front Panel on page 9-6 for more information.

Write Community (WR COMMUNITY)

Enter the authentication strings used for SNMP management. Match the TSU IQ+ to the SNMP manager for write privileges. If using front panel entry, see the section Entering Letters Using the Front Panel on page 9-6 for more information.

Trap Mgr Options (TRAP MGR OPTS)

The TRAP MANAGER OPTIONS table defines routes for up to five

SNMP managers.

Trap Manager DLCI (TRAP DLCI)

If the TRAP MANAGER PORT is set for NETWORK or DTE, this parameter identifies the virtual circuit used for all traps generated by the TSU IQ+.

Trap Manager IP (TRAP IP)

Enter the IP address of the SNMP manager to which the TSU IQ+ sends traps.

Trap Manager Port (TRAP PORT)

Enter the TSU IQ+ port used to transmit traps to the SNMP manager.

Choices: NONE, DTE PORT; NETWORK PORT; CONTROL PORT. (The

ethernet port selection is available only if the ethernet card is installed.)

Next (NEXT key on front panel)

Edit the next entry in theTrap Manager Options table.

61200275L1-1 TSU IQ+ User Manual 9-3