Chapter 10. Statistics

CRC Errors

Number of frames received with CRC violations. This transmission error is also reflected in the DISCARD FRAME field.

Octet Align

Number of frames received with a bit count that does not fall on 8-bit boundaries. This transmission error is also reflected in the

DISCARD FRAME field.

T1 State Change

Count of state changes for the T1 port.

T1 UA Time

Time in seconds the T1 link is down.

The next six parameters (SIGNAL LOSS, TELCO TEST, AIS ALARM, RED ALARM, YELLOW ALARM, and PLL ALARM) are events with two states: active and inactive. If the event occurs one or more times for the given interval, the field is active and ALARM is displayed. The first column of the VIEW BY INTERVAL menu represents information for the entire cur- rent day. Therefore, once an alarm becomes active, it remains active in the first field for the entire 24-hour period.

Signal Loss

If ALARM is displayed, a loss of signal occurred one or more times during the given interval.

Telco Test

If ALARM is displayed, a loopback code was received on the T1 interface one or more times during the given interval.

AIS Alarm

If ALARM is displayed, unframed all ones were received on the T1 interface one or more times during the given interval. This indicates that the T1 is out of service.

Red Alarm

If ALARM is displayed, a loss of frame synchronization occurred one or more times during the given interval.

61200275L1-1

TSU IQ+ User Manual

10-13

Page 125
Image 125
ADTRAN 1204002L2, TSU IQ+ user manual T1 State Change, T1 UA Time, Signal Loss, Telco Test, AIS Alarm, Red Alarm