ADTRAN 1204002L2, TSU IQ+ user manual Ping

Chapter 11. Testing

Ping

Select PING to send a ping request to a specific address. This option is available only with ethernet card installed.

Address to Ping (PING ADDRESS)

Enter the IP address of the unit the TSU IQ+ is sending an echo request (ping) to.

Start Ping

Results are shown once you start the ping. The START PING command causes the TSU IQ+ to send ten ping requests to the target station. At the end of the ten-ping test, the following results are shown:

Pings Transmitted (PINGS TX)

This field shows the number of pings sent (always 10).

Ping Responses (PINGS RX)

This field shows the number of responses received from the pinged device.

Min Response Time (MIN RESP TIME)

This field shows the shortest round-trip delay (in ms) of the received responses. Round-trip delay is counted from the time the ping is sent until the response is received.

Max Response Time (MAX RESP TIME)

This field shows the longest round-trip delay (in ms) of the received responses. If a response is not received before the unit times out, the delay is not calculated in.

Avg Response Time (AVG RESP TIME)

This field shows the average response time (in ms) based on all received responses.

61200275L1-1 TSU IQ+ User Manual 11-3