
Chapter 10. Statistics
Descriptions of the fields shown on the NETWORK PORT STATISTICS screens are shown below.
Signaling State
Indicates if the signaling state is currently up or down.
Interval Remaining
Number of seconds remaining in the current timed interval (only shown in the VIEW BY INTERVAL screen).
TSU State
Current state of the TSU. Possible states are listed in Table
| Table |
|
|
TSU STATE | DESCRIPTION |
|
|
OPEN LOOP | No receive signal |
|
|
TEST FROM TELCO | Loopback code received from telco |
|
|
AIS ALARM | Unframed all ones received |
|
|
RED ALARM | Loss of frame synchronization |
|
|
YELLOW ALARM | Telco side loss of frame synchroniza- |
| tion |
|
|
ESF NORMAL | Normal condition for ESF link |
|
|
D4 NORMAL | Normal condition for D4 link |
|
|
PRI State
Current state of the PRI circuit (shows only if a PRI card is installed).
DBU State
Current state of the DBU circuit (shows only if a DBU card is installed).
Rx Frames
Number of frames received by the network port.
Rx Bytes
Number of bytes received by the network port.
TSU IQ+ User Manual |
|