Chapter 7. Configuring the Network Port
The status of the connection can be viewed in the STATISTICS menu
under NETWORK PORT SIGNALING STATE (see Signaling State on
page
Range: 1 to 10.
The network service provider should recommend the values entered into the T391, N391, N392, and N393 fields.
Management DLCI 1 and 2 (DLCI 1 and 2)
Enter the management data link connection identifiers (DLCIs). These DLCIs are used to carry management traffic to and from the network.
Range: 16 to 1007.
Management DLCI 1 and 2 Mode (DLCI 1 and 2 MODE)
Set to DEDICATED if the management DLCI is used only to manage the TSU IQ+ (and not used to carry customer traffic). If set to DEDICATED, the router is not notified of that DLCI. Set to SHARED if the management DLCI is used for carrying customer traffic and management data.
Choices: SHARED; DEDICATED.
Maximum PVC Count
Set the maximum number of PVCs that the TSU IQ+ will monitor for statistical information. This value determines the amount of history intervals available for storage. To get the maximum amount of statistical history storage, set this value equal to the number of PVCs assigned to the frame relay port. A smaller value increases history interval count but puts some of the PVC statistics into the unknown category.
Range: 1 to 100.
TSU IQ+ User Manual |
