
Chapter 9. System Configuration
ENTERING LETTERS USING THE FRONT PANEL
Configuring the READ/WRITE COMMUNITY names requires the entry of letters rather than numbers. When configuring the unit using the front panel, the following steps must be taken in order to perform these entries. The following example uses the WRITE COMMUNITY name.
1.Select WRITE COMMUNITY from the SYSTEM CONFIGURATION
menu.
2.Press the up arrow key to scroll to the desired character.
3.Press Enter.
4.Repeat steps 2 and 3 until all characters have been selected.
5.Press the Enter key to complete the entry.
TSU IQ+ User Manual |
|