Intel IB850 user manual PNP/PCI Configurations, PNP OS Install, Reset Configuration Data

BIOS SETUP

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

PNP OS Install	No	ITEM HELP
Reset Configuration Data	Disabled	Menu Level >
Resources Controlled By	Auto (ESCD)	Select Yes if you are
IRQ Resources	Press Enter	using a Plug and Play
		capable operating
DMA Resources	Press Enter
		system Select No if you
		need the BIOS to
PCI/VGA Palette Snoop	Disabled	configure non-boot
INT Pin 1 Assignment	Auto	devices
INT Pin 2 Assignment	Auto
INT Pin 3 Assignment	Auto
INT Pin 4 Assignment	Auto
INT Pin 5 Assignment	Auto
INT Pin 6 Assignment	Auto
INT Pin 7 Assignment	Auto
INT Pin 8 Assignment	Auto

PNP OS Install

Enable the PNP OS Install option if it is supported by the operating system installed. The default value is No.

Reset Configuration Data

This field allows you to determine whether to reset the configuration data or not. The default value is Disabled.

Resources Controlled by

This PnP BIOS can configure all of the boot and compatible devices automatically with the use of a use a PnP operating system such as Windows 95.

PCI/VGA Palette Snoop

Some non-standard VGA display cards may not show colors properly. This field allows you to set whether or not MPEG ISA/VESA VGA cards can work with PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.

52 IB850 User’s Manual