Panasonic WJ-ND200 manual Pausing, Frame play/reverse

Play recorded images on the removal hard disk drive

Screenshot 1

Start operation from the operation window after select-

ing the connected removable hard disk drive.

Step 1

Click the [PLAY] button.

→ Playback of recorded images will start. will be displayed in the status display area.

Notes:

• The pointer on the slider will indicate the current playback point.

• When playback is started by selecting a recording event listed in the search result, the selected record- ing event in the search result list will remain selected even when playback of the next recording event starts. (The recording event currently being played will not be highlighted in the search result list if it is not the selected recording event from the search result list.)

Descriptions of the playback operation buttons

REV PLAY	• Reverse playback will start.
Pausing	• Playback will be stopped when this button is clicked during
	playback.
Frame play/reverse	• The frame display and the reverse frame display are available
frame play	only during playback or pause.
	• When the [NEXT IMAGE] button is clicked, the next frame is
	played and paused.
	• When the [PREV IMAGE] button is clicked, the previous frame
	is played and paused.
	Note:
	When the image currently being played is in MPEG-4 format,
	some frames of recorded images will not be displayed.
	Reverse frame play will be performed with the set refresh
	interval of the camera.

13