- 144 -
Using [Home Cam]
≥Perform the home monitoring operation on the smartphone. (l148)
≥When the firewall is turned on, the Wi-Fi f unction may not work correctly. If this occurs, check the
network settings.
∫If the device is Android (NFC-compatible)
≥Set the NFC function of the smartphone to ON.
1Turn off the Wi-Fi setting of the smartphone.
2Start up the smartphone application “Image App”.
≥When a Wi-Fi connection guidance screen is displayed, select [NO].
3Enable the home monitoring setting from the menu of the smartphone
application “Image App”.
≥Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home
Monitor].
4Select [Set connect. dest.] of the smartphone.
5Touch the smartphone on of this unit.
≥If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touc h the
smartphone on of this unit again.
≥If the unit is not recognized even when touching the
smartphone, change positions and try again.
≥Check that the message “Connecting...” has disappeare d from this unit.
6When [Start “Home Cam”?] is displayed on the smartphone, select [YES].
7Start home monitoring.
∫Connecting with Android (non-NFC-compatible) or iOS device
1Press Wi-Fi button and touch [Home Cam].
2Turn off the Wi-Fi setting of the smartphone.
3Start up the smartphone application “Image App”.
≥(If the device is Android)
When a Wi-Fi connection guidance screen is displayed, select [No].
≥(If the device is iOS)
If a confirmation message for the Wi-Fi setup is displayed, selec t [Close].
4Enable the home monitoring setting from the menu of the smartphone
application “Image App”.
≥Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home
Monitor].
When using the home monitor function for the first time