- 199 -
“ERROR OCCURRED.
PLEASE TURN UNIT OFF,
THEN TURN ON AGAIN.”
is displayed.
≥The unit has automatically detected an error. Restart the unit
by turning the unit off and on.
≥The unit will be turned off in about 1 minute if the unit is not
turned off and on.
≥Repair is needed if it is repeatedly displayed even if it is
restarted. Detach the power connected, and consult the
dealer who you purchased this unit from. Do not attempt to
repair the unit by yourself.
Indication
Problem Check points
Remaining battery
indication is not displayed
properly.
≥The remaining battery capacity indication is an
approximation.
If the remaining battery capacity indication is not displayed
correctly, fully charge the battery, discharge it and then
charge it again.
Recording
Problem Check points
The unit arbitrarily stops
recording.
≥Use an SD card that can be used for motion pict ure recording.
(l16)
≥The recordable time may have shortened due to the
deterioration of the data writing speed or repeated reco rding
and deletion. Using the unit, format the SD card. (l40)
≥If [AGS] is [ON], record in the normal horizontal position or set
[AGS] to [OFF]. (l76)
Auto Focus function does
not work.
≥Switch to Intelligent Auto Mode or Intelligent Auto Plus Mode.
≥If you are trying to record a scene which is hard to bring into
focus in Auto Focus Mode, use the Manual Focus Mode to
adjust the focus. (l51, 62)
Color balance of images is
strange when recording in
a place such as a
gymnasium.
≥In a place with multiple light sources, such as a gymnasium or
a hall, set the White Balance setting to (Indoor mode 2).
If you cannot record clearly with the (Indoor mode 2), set
it to (Manual adjustment mode). (l60)
Power
Problem Check points