- 58 -
≥Change the Recording Mode to . (l49)

1Press the button to record the still pictures. (l26)

2Touch [Enter].

≥A still picture will be recorded, and it will be displayed in a semi-transparent state on the recording
screen. Look at the picture to estimate how far you sho uld move the subject for the next
recording.
≥If you have already recorded still pictures in the recording group, the last still picture will be
displayed in a semi-transparent state on the recording scree n.
≥To record again, touch and record again .

3Move the subject and determine the composition of the picture.

≥Repeat Steps 1-3 to continue recording.
≥You can save still pictures in the same recording group until you use [Create Stop Motion].

Creating a new recording group

≥If you touch [YES], a new recording group will be created and the recording screen will be
displayed.
≥Once you create a recording group, you cannot save still pictures in any of the older recording
groups.
≥[PICTURE SIZE] is set to (1920k1080).
≥When you want to record still pictures in a separate recording group, use a different SD card.
≥For details on playback of the Stop Motion Animation Assist Mode , refer to page 105.
Stop Motion Animation Assist

Before recording in Stop Motion Animation Assist Mode

You can create a slideshow that appears to be moving by recording the sub ject while moved a
little at a time.
≥Each recording group can store up to 999 still pictures recorded in Stop Motion Animation
Assist Mode.
: [PICTURE] # [Create Stop Motion]
MENU
2.1M