- 166 -
Enter a PIN code to set the Wi-Fi connection
1Touch [PIN code] in Step 6.
2Touch the wireless access point to be connected.
≥If you touch [Refresh], you can search for wireless access p oints again.
3Touch [ENTER].
4Enter the PIN code displayed on this unit screen into the wireless access
point.
≥For further details, please read the operating instr uctions for the wireless access point. (When
using a tethering connection, please read the ope rating instructions for the smartphone.)
5Touch [NEXT].
≥A message is displayed when the connection is complete.
≥A message is displayed when the connection attempt fails. Touch [EXIT], and set the c onnection
again.
≥Confirm Encryption key (Password) of the selected wireless access po int if the network
authentication is encrypted.
1Press Wi-Fi button.
≥When the Wi-Fi button is pressed for the first time , a message is displayed. Touch [YES], and
proceed to step 5.
2Touch [Wi-Fi Setup].
3Touch [Wireless Settings].
4Touch a Blank row.
≥For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Wireless Settings] on page 174.
5Touch [Search for wireless network].
6Touch the wireless access point to connect.
≥Touch [ENTER].
≥If you touch [Refresh], you can search for wireless access
points again.
≥When no wireless access points are displayed, refer to “S etting up a connection manually”.
(l167)
≥If an Encryption key (Password) is not set, the connection is co mplete and a message is
displayed.
7(When there is an Encryption key (Password))
Enter the Password.
≥For details on how to enter characters, refer to page 95.
≥When the entry is complete, touch [Enter].
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j is displayed on the screen

Searching for wireless access points to set up a connection

A[Delete]
B[ENTER]