- 66 -
In Motion Picture Recording Mode, you can furthe r improve optical image stabilization by
touching and holding . With this function, you can further redu ce the effects of the
shake that tends to occur when using zoom.

1Touch to turn the Image Stabilizer on. (l64)

2Touch and hold .

≥Icon is displayed in A while you are touching and holding .
≥Optical Image Stabilizer Lock is released when you remove your finger from the icon.
∫To make the display of disappear
Display of will not disappear even when no operation is performed for specific time with the
default setting. To make the display of disappear, change the setting of the [O.I.S. LOCK
DISPLAY].
≥Stabilization may not be possible under strong shaking conditions.
≥To record while moving the unit quickly, release Optical Image Stabilizer Lock.
It is possible to focus and record a still p icture of a subject that is touched.

1Touch .

≥An icon is displayed A.

2Touch the subject.

≥Focus area is displayed at the touched position, and a still
picture is recorded.
≥Depending on the recording conditions or recognition of the touched position, it may not be
possible to record the intended picture.
≥This will not operate for recording yourself.
Optical Image Stabilizer Lock
: [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting
[ON]: Constantly display.
[OFF]: The icon will disappear after approx. 5 seconds without any to uch operation.
Touch Shutter
MENU