- 131 -
The Eye-Fi menu only appears when an Eye-Fi ca rd is used.
The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to
changes to the card specification etc.
Update the firmware of the Eye-Fi card to the late st one using the software supplied with the Eye-
Fi card before use.
When the endless memory function of the Eye-Fi card is set to on, the files transferred from the
card may be deleted automatically.
The Eye-Fi card may heat up as a result of the files being transferred. Note that the use of an
Eye-Fi card accelerates the battery drain, so we recommend you use the card in Pl ayback Mode.
The Eye-Fi setting can be checked while pausing the reco rding.
If the Eye-Fi card is removed and then reinserted into the unit, set functions related to Eye-Fi
again from the menu.
When using the Eye-Fi card, please be sure to unlock the write-pr otect switch. (l16)
Before deleting the files, please confirm they have bee n transferred to your PC and uploaded to
the sharing site.
Do not use the Eye-Fi card in locations where the us e of wireless devices is forbidden, such as
inside aircraft etc.
Depending on network conditions, the transfer may take some time. Also, if network conditions
deteriorate, the transfer may be suspended.
Files over 2 GB in size cannot be transferred. Such files sh ould first be split to reduce the file size.
(l109)
[Eye-Fi TRANSFER] is set to [ON](Transferring in Eye-Fi direct mode)[Eye-Fi TRANSFER] is set to [ON][Eye-Fi TRANSFER] is set to [OFF]