![](/images/new-backgrounds/1141025/141025259x1.webp)
∫Using Eye-Fi direct mode
The files can be transferred directly from the
≥Install the software supplied with the
≥Insert an
Select the menu.
MENU : [SETUP] # [Eye-Fi DIRECT]
≥This mode is displayed only when
≥The mode will be canceled using the following steps. jWhen the unit is turned off
jIf you start recording motion picture
In addition to the steps above, the mode may also be canceled by the
≥When connected via
∫Selecting files to transfer
If you perform the required settings in advance on your PC, you can transfer selected files alone. For settings methods etc., please read the card operating instructions or consult the card manufacturer.
≥Install the software supplied with the
≥Insert an
≥Press the recording/playback button to switch to the Playback Mode, and touch the play mode select icon. Then, select [MP4/iFrame] or [PICTURE]. (l 28)
Select the menu.
MENU : [VIDEO SETUP] or [PICT. SETUP] # [TRANSFER/PROTECT]
≥The setting method is the same as that for the scene protect settings. (l 111)
≥If the selected transfer setting is not configured on the computer, [SCENE PROTECT] is displayed and the selected transfer setting cannot be configured.
≥When the write protect switch on the
≥The protect setting is also applied to the files for which [TRANSFER/PROTECT] is set. To delete a file, first cancel [TRANSFER/PROTECT] and then perform the operation.
≥AVCHD scenes cannot be used as the selected transfer setting.