[PC Connect Setup] | [Change]/[Return to default] |
You can change the workgroup setting.
≥When copying scenes or still pictures to a PC using a
≥For information on how to create a shared folder, refer to page 153.
[Change]:Enter the name of the workgroup to which the destination PC belongs.
[Return to default]: This will set to the condition at the time of purchase.
≥For details on how to enter characters, refer to page 95.
≥A maximum of 15 characters can be entered.
Using the “LUMIX CLUB”
Acquire a “LUMIX CLUB” Login ID (free).
You can upload the scenes and still pictures recorded with this unit to WEB service with [Link to Cell] or use the [Live Cast] function if you register to “LUMIX CLUB”.
≥You can set the same “LUMIX CLUB” Login ID for this unit and a smartphone.
When Login ID is acquired over the smartphone (“Image App”) only, it is possible to register the same Login ID to this unit using the “Image App”. (l 178)
When different Login IDs are acquired for this unit and the smartphone, change one of the Login ID and Password to the one you like to keep.
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/
1Press 
2Touch [LUMIX CLUB].
3Touch [Add/Change Account].
4Touch [New account].
≥Connect to the network. Proceed to the next page by touching [NEXT].
5Read through the “LUMIX CLUB” terms then touch [Agree].
≥ Touch [EXIT] to cancel the process without acquiring a Login ID.
6Touch [NEXT] and enter a Password.
≥Enter any combination of 8 to 16 characters and numbers for the Password.
≥For details on how to enter characters, refer to page 95.
7Check the Login ID and touch [OK].
≥The Login ID
≥Be sure to make a note of the Login ID and Password.
