- 69 -
This allows recording of the pictures an d sound to start approximately 3 seconds befor e the
recording start/stop button is pressed.
appears on the screen.
Aim the unit at the subject beforehand.
There is no beep sound.
PRE-REC is canceled in the following cases.
jPress the recording/playback button
jTouch the recording mode switching icon
jIf you remove the SD card
jIf you touch
jIf you press the Wi-Fi button
jIf you turn the unit off
jIf you start recording
jAfter 3 hours have passed
After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken
3 seconds before pressing the recording start/stop button ca nnot be recorded.
Images displayed on the thumbnail in Playback Mode will differ from the motion pictures
displayed at the start of playback.
When the button is pressed, the flash is activated and the picture will be recorded. Use
the Built-in flash in order to record still pictures i n dark places.
Each time the icon is selected, the indication changes by one setting in the following order:
ß ([ON]) # ßA ([AUTO]) # ([OFF])
The unit automatically determines if the flash is ne cessary even when it has been set to by
detecting the ambient brightness. (If it determines that the flash is necessary, the indication
lights up in red.)

To adjust the brightness of the flash

If the ß indication etc. flashes when the button is pressed halfway, the flash is not activated.
Do not use with Filter Kit (optional) or Conversion Le ns (optional) attached.
The available range of the flash is approx. 1.5 m (4.9 feet) in dark places.
PRE-REC
This prevents you from missing a shot.
Built-in flash
: [PICTURE] # [FLASH LEVEL] # desired setting
ßi:Much brighter
ßd0: Normal
ßj:Less bright

PRE-REC

MENU
MENU