- 151 -

Playing back on a TV

You can play back the scenes and still pictures recorded with or stored in this unit on a TV.
≥The following scenes can be played back:
jScenes recorded in AVCHD
jScenes recorded in MP4/iFrame [720]
jScenes saved in MP4 (High Quality) or MP4 (Low Quality)
1Press Wi-Fi button and touch [DLNA Play].
≥If you touch [Change AP], you can switch the wireless access point to another one that has be en
registered to this unit.
≥If you touch [CANCEL], the Wi-Fi connection is cancel ed.
≥When the connection is complete, the screen of this unit turns off. To display it again, touch the
screen.
2Select this unit (SSID) by the TV side.
≥Select SD media and select the motion picture ([AVCHD/MP4]) or still picture ([JPEG]) to play
back.
3Perform playback operations with the TV remote control.
≥Playback operations may differ depending on the TV in use.
≥The following operations can be performed if a c olor button is
pushed.
Blue/Red: Skip playback
≥Fast forward/Fast rewind playback cannot be perform ed.
≥You cannot perform playback operations with this unit.

To exit [DLNA Play]:

Touch [EXIT] or press Wi-Fi button.
≥A message is displayed. Touch [YES] to exit.
≥Scenes recorded in the following [REC MODE] can not be p layed back:
jMP4/iFrame: [1080/50M]/[1080/28M]/[iFrame]
≥The scenes may not be played back smoothly depending on you r environment, such as the
network condition.
(Examples of operations during
motion picture playback)
ASkip playback
BStop
CPlayback/Pause