[QUICK START]
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥When in Quick Start Standby Mode about 50% of the power used in recording pause mode is being consumed, so the recording time will be reduced.
≥Quick Start will not work if there is no SD card inserted.
1Select the menu.
MENU : [SETUP] # [QUICK START] # [ON]
2Close the LCD monitor.
The status indicator A flashes green and the unit goes into Quick Start Standby Mode.
≥The lens cover does not close.
3Open the LCD monitor.
The status indicator A lights red and the unit is put into recording pause.
≥About 5 minutes have passed, the Quick Start Standby Mode is canceled, and the unit is turned off.
≥Depending on the recording conditions and menu settings, time for Quick Start may be longer than 0.6 seconds.
≥It may take some time for Automatic White Balance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)] (l 35)/[ECONOMY (AC)] (l 35), close the LCD monitor once and open it again.
≥Turn the unit off using the power button.
- 36 -
