Panasonic WV-CP304, WV-CP310 “MASK SET” screen, “DISPLAY MODE” screen, Step, “MOTION DET” screen

Step 2

Move the cursor to "MASK SET" and press the [SET] button.

→The “MASK SET” screen appears.

“MOTION DET” screen				“MASK SET” screen
**MOTION DET**(1)
LEVEL	....I..		20
DWELL TIME	-	+
	2S
DISPLAY MODE
ALARM	OFF
MASK SET

RET TOP END

In the masked area, no alarm will be issued even if a moving object is detected. The masked area is set in the same way as the masked area setting in Light quantity control method selec- tion. ( page 11)

Step 3

Hold down the [SET] button for more than 2 seconds after completion of masking.

→Return to the previous menu.

Step 4

Move the cursor to "ALARM", press the [LEFT] and [RIGHT] buttons to select "ON" or "OFF". ON: Outputs alarm signal when in motion detection mode. Actions may be confirmed through

the motion detection mode when a moving object is detected.

OFF (default): Does not output alarm signal when in motion detection mode.

Step 5

Move the cursor to “DISPLAY MODE” and press the [SET ] button. The “DISPLAY MODE” screen appears.

If a moving object is detected in the set area, the area will be reversely highlighted. Hold down the [SET] button for more than 2 seconds to return.

“MOTION DET” screen				“DISPLAY MODE” screen
**MOTION DET**(1)
LEVEL	....I..		20
DWELL TIME	-	+
	2S
DISPLAY MODE	OFF
ALARM
MASK SET
RET TOP END

18