Step 6
Move the cursor to “Level”. Use the [right] or [left] button to adjust the level. Repeat step 5 and 6 to adjust to optimal level.
Step 7
Move the cursor to “DWELL TIME ”. Select the dwell time from the following.
2 S (default)/5 S /10 S /30 S
Alarm signal will be issued once a continuously moving object is detected within the specified time.
Setting of scene change detection
This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap, or others, or by changing the camera direction largely.
Follow the procedure below.
“CAMERA SETUP” screen
**CAMERA SETUP**
SCENE1 |
|
|
|
|
|
|
|
ALC/ELC | ALC |
|
|
|
|
|
|
| |||||||
| |||||||
SHUTTER | OFF | ||||||
AGC | ON(HIGH) | ||||||
SENS UP | OFF | ||||||
WHITE BAL | ATW1 |
|
|
|
| ||
| |||||||
| |||||||
DNR | HIGH | ||||||
D&N(IR) | AUTO1 |
|
| ||||
| |||||||
VMD |
|
|
|
|
|
|
|
SCENE CHANGE | |||||||
RET TOP END |
|
|
|
|
|
|
|
Step 1
Move the cursor to “VMD”. Use the [right] or [left] button to select “SCENE CHANGE”.
19
