Panasonic WV-CP310 J Flaw compensation PIX OFF, K Communication setting COMMUNICATION, Step

J Flaw compensation [PIX OFF]

Flaws of pixel in the displayed camera image are corrected. Up to 16 points can be corrected. Follow the procedure below.

Step 1

Move the cursor to "PIX OFF" and press the [SET] button.

→The "PIX OFF" screen appears.

Step 2

Select a number (1 to 16) with which a pixel compensation point is registered and press the [SET] button.

→The pixel compensation positioning screen appears.

Step 3

Use the [up], [down], [right], and [left] buttons to move the crosshair cursor to the center of the flaw to be corrected and press the [SET] button.

→The flaw is corrected and the pixel compensation point is registered. The "PIX OFF" screen appears again. An asterisk "*" is attached at the right side of the number when registration is completed. The coordinate is expressed in figures.

Note:

•To clear the registered pixel compensation point, move the cursor to “1” of the right of “DEL”, use the [right] and [left] buttons to select the number with which the target pixel compensation point is registered and press the [SET] button. The registered pixel compen- sation point is cleared, and an asterisk "*" at the right side of the number disappears.

K Communication setting [COMMUNICATION]

The required communication configuration is performed to use this unit integrated into the sys- tem with a receiver.

COAX (RCV): Select COAX (RCV) when using our decoder (e.g. WV-RC150).

COAX (default): Select this setting when not using any receiver.

24