Panasonic WV-CP314, WV-CP310 L Default resetting CAMERA RESET, M Serial number viewing SER.NO

L Default resetting [CAMERA RESET]

The settings in the setup menu are restored to the default settings.

Move the cursor to "→ PUSH SET" of "CAMERA RESET" and hold down the [SET] button for more than 2 seconds to enter the next screen. To return to the previous screen without reset- ting, move the cursor to “NO” and press the [SET] button. To restore the default settings, move the cursor to "YES" and press the [SET] button.

Note:

•The data of the registered pixel compensation points is not cleared.

•To set whether to reset the camera, select “YES” or “NO” by using the [SET] button. To set with a controller, refer to the instruction manual of the controller.

M Serial number viewing [SER.NO.]

Displays the serial number of this product.

25