Panasonic WV-CP314, WV-CP310, WV-CP304 Camera title setting CAMERA ID, Character entry, Step

Camera title setting [CAMERA ID]

This item specified the camera title. The camera title is named with up to 8 characters when using only Chinese characters, and up to 16 characters when using only English letters or num- bers. Chinese character, English letters and numbers can be used together. The "CAMERA ID" display can be turned on or off on the monitor screen.

Top screen			"CAMERA ID" screen			Display positioning screen
MODEL	WV-CP310 SERIES			**CAMERA ID**
CAMERA ID		ON		0	123456789		FLOOR	1
CAMERA					ABCDEFGHIJKLM
SYSTEM				NOPQRSTUVWXYZ
SPECIAL			().,'":;&#!?=
LANGUAGE			+-*/%$

SPACE POSI

RET TOP END RESET

END SETUP ENABLE................

Editing area

Step 1

Select "ON" for "CAMERA ID", and then press the [SET] button.

→The "CAMERA ID" appears.

Important:

•When "CAMERA ID" is set to "OFF", the camera title does not appear even after setting the camera title.

Step 2

Move the cursor to the target item with use of the [UP], [DOWN], [RIGHT], and [LEFT] buttons, and press the [SET] button to enter the character.

→The entered characters are displayed in the editing area.

<Character entry>

•To input English letters and numbers, move the cursor to the desired letter or number and press the [SET] button, to display the screen after enter of English letters and numbers.

•To revise a character, move the cursor to (↑) in the editing area, then move the cursor (↑) to an incorrect character with use of the right or left button, and enter a correct character.

•To enter a blank, move the cursor to "SPACE" and press the [SET] button.

•To delete all the entered characters, move the cursor to "RESET" and press the [SET] button.

Step 3

Move the cursor to "POSI" and press the [SET] button after title entered.

→The display positioning screen appears.

Step 4

Use the [UP], [DOWN], [RIGHT], and [LEFT] buttons to decide the title position and press the [SET] button.

→The title position is specified.

9