9
Be sure to remove this apparatus if it is
not in use.
Radio interference
When the camera is used near TV/radio
antenna, strong electric field or magnetic
field (near a motor or a transformer), images
may be distorted and noise sound may be
produced.
Mounting screws
Only the fixing screws are provided to fix the
camera with the provided mounting bracket.
It is necessary to procure screws or bolts to
mount the camera. Prepare them according
to the material and strength of the area where
the camera is to be installed. The screws and
bolts must be tightened with an appropriate
tightening torque according to the material
and strength of the installation area.
Consumable parts
Contact your dealer for replacement of the
following part when the time comes:
Cooling fan needs replacement after around
30 000 hours of operation.
Do not operate the camera beyond the
specified temperature, humidity or power
source ratings.
Use the camera at temperatures within
–10°C to +50 °C {14°F to 122 °F}, and
humidity below 90 %. The input power
source is 24 V AC or 12 V DC.
What to do if OVER HEAT appears on the
display.
This message indicates that the inside of the
camera has become extremely hot.
Immediately turn off the camera and contact
your dealer.