Panasonic WX-C3010 manual Vehicle Detector Normal/Override On, Talk/Page Release

●Vehicle Detector Normal/Override On

The Vehicle Detector operation can be set up. Normal/Override On setup can be made by button operation at the front panel of this unit.

When the Override On mode is set, the V/D Override indica- tor of the center module will light in yellow. When the V/D Override button is pressed, the Normal mode is assumed and this indicator will disappear.

	OPERATIONAL SETTING
SPEED	BEEP	OUTSIDE	V/DET	T/P
TEAM	DAY/NIGHT	SP LEVEL	OVERRIDE	RELEASE
	ON:DAY	ON:DAY

Vehicle Detector Normal/Override On Button

NORMAL: The vehicle detector turns on only when a vehicle is detected at the menu board. When the detector turns on, a beep tone is heard in the headset. When the Talk button is pressed on the Order Taker or All-in-One Headset side, the Outside Speaker and the Outside Microphone are turned ON at the menu board.

When the vehicle leaves, the vehicle detector turns off. When setting the normal position, Auto Talk Lock mode is enabled.

OVERRIDE ON: The vehicle detector is always turned on. When setting the override on position, Auto Talk Lock mode is invalid.

●Talk/Page Release

In Talk or Page mode, any talk is temporarily interrupted at the headset (Order Taker or All-in-One Headset).

Operation of Talk/Page Release is possible by button opera- tion at the front panel of this unit.

	OPERATIONAL SETTING
SPEED	BEEP	OUTSIDE	V/DET	T/P
TEAM	DAY/NIGHT	SP LEVEL	OVERRIDE	RELEASE
	ON:DAY	ON:DAY

Talk/Page Release Button

Notes:

•If POS Remote is set for ON, you have to note that no button operation of the Talk or Page Release is possible at the center module.

•It is impossible to release the Talk or Page mode of the All-in-One Headset or Order Taker in the manager

mode.

15