Panasonic WX-C3010 manual Info about POS Remote functions, Functions Terminal names Usage

■Info about POS Remote functions

Remote control becomes possible if any external device is connected to the POS Remote terminal of the center module. To use the POS Remote functions, POS Remote setup shall be turned ON. (Refer to page 29. )

Functions (Terminal names)		Usage
V/D OUTPUT	V/DET1	Activated when Vehicle Detector 1 is ON
	V/DET2	Activated when Vehicle Detector 2 is ON.
POS AUDIO STATE OUTPUT	PAGE	Activated when a PAGE sound is provided to POS
		AUDIO OUT.
	TALK	Activated when a TALK sound is provided to POS
		AUDIO OUT.
NIGHT MODE INPUT	DAY	Disables the vehicle detector beep on the other
		lane. (To short-circuit the terminals)
	NIGHT	Reduces the volume of the vehicle detector beep
		on the other lane. (To open-circuit the terminals)
OUTSIDE SP LEVEL INPUT	DAY	Outside speaker volume is normal level.
		(To short-circuit the terminals)
	NIGHT	Outside speaker volume is 50 % level.
		(To open-circuit the terminals)
SPEED TEAM INPUT		With ON setting, Speed Team mode is assumed.
		(ON with the terminals short-circuited )
TALK LOCK RELEASE INPUT		When turned ON for 1 second, Talk/Page Release
		control is carried out. (ON with the terminals short-
		circuited )
POS AUDIO STATE INPUT	MANAGER	With ON setting, the input sound entered in the
	SELECT	POS Audio Input circuit can be heard only with the
		manager’s headset. (ON with the terminals short-
		circuited )
	PAGE SELECT	With ON setting, the input sound entered in the
		POS Audio Input circuit can be heard at the head-
		set. (ON with the terminals short-circuited )
POS AUDIO INPUT		The sound input from the POS or an external
		device is entered.
		This sound input is changed over by POS Audio
		State Input control.
POS AUDIO OUT		The sound output is sent to the POS or an external
		device. The contents of sound output are reported
		by POS AUDIO State Output.

30