■Installed System Setting
After the completion of installation work, system setup shall be made according to the equipment to be connected and the oper- ation mode.
Setup operation for the installed system shall be carried out by the use of the PREV/NEXT button and the SEL button.
Indicator of the selected setup item blinks.
|
| AUX IN | ECHO CANCELLER | DUAL LANE | |
AUX |
| TALK | DNR LEVEL | LANE SELECT | |
|
|
| |||
SP |
| PAGE | RED | MAX | POS REMOTE |
|
| ||||
|
| BEEP | YELLOW MD | TX POWER | |
|
| GREEN LOW | |||
|
| ||||
|
|
| OFF | OFF |
|
OFF: Lighting time is short and unlighting time is long.
ON: Lighting time is long and unlighting time is short.
Lit
Unlit
OFF:
INSTALL SYSTEM SETTING | ||
PREV | SEL | NEXT |
ON:
Lit
Unlit
NEXT button
SEL button
PREV button
1.Turn on the power supply of the center module.
2.Press the [NEXT] button or the [PREV] button.
Indicator of the selected setup item blinks. Each time the [SEL] button is pressed, there is a reciprocal changeover between ON Select and OFF Select status.
The ON/OFF status can be defined by the style of indi-
cator blinking.
3.When the ON/OFF is changed over, the selected status is reflected on the system in
4.When the [NEXT] button is pressed, the next setup item is selected. (The setup item being selected is moved by one to the lower position or to the top right.)
When the [PREV] button is pressed, the previous setup item is selected. (The setup item being selected is moved by one to the upper position or to the bottom left.)
5.If any [NEXT], [SEL], or [PREV] button is not pressed for 10 seconds, blinking of the indicator is finished.
●Setup operation for AUX SP (Auxiliary Speaker)
The sound output is set up for the AUX SP.
| Setup item | ON (Green) | OFF | |
|
|
|
|
|
AUX SP |
| AUX IN | AUX IN audio is output to the auxiliary speakers. | No output |
|
|
|
|
|
|
| TALK | TALK audio is output to the auxiliary speakers. | No output |
|
|
| * The sound of Outside Mic is also output to AUX SP. |
|
|
|
|
|
|
|
| PAGE | PAGE audio is output to the auxiliary speakers. | No output |
|
|
|
|
|
|
| BEEP | BEEP audio is output to the auxiliary speakers. | No output |
|
|
|
|
|
26
