Receive To Memory
Printing Documents
After receiving a document with the Receive To Memory feature, the following message will appear on the display.
MESSAGE IN MEMORY < RCV TO MEMORY >
To print the documents, follow the steps below.
Make sure that the FAX lamp is ON. If not, press 
1
2
3
4
5Enter the password to print the documents.(See Note 1)
Ex: 1 2 3 4
to select the "FAX MODE".
SELECT MODE |
ENTER NO. OR ∨ ∧
RCV TO MEMORY=ON 1:OFF 2:ON 3:PRINT
RCV TO MEMORY=PRINT 1:OFF 2:ON 3:PRINT
INPUT PASSWORD
❚❚❚❚
INPUT PASSWORD
1234
ADVANCED | FEATURES |
|
|
6
Machine will start to print the documents.
NOTE
* PRINTING *
MEMORY RCV’D DOC
1. If the password has not been set, your machine will not prompt you to enter the password.
The documents will be printed immediately after pressing SET in step 4.
2.Once the RCV TO MEMORY feature is set to "On", the password cannot be changed (Fax Parameter No. 037 will not be shown on the LCD display). If you wish to change the password, set RCV TO MEMORY feature to “Off” first. Then change the password. (See page 94)
95
