Panasonic SM28B, XN200, UC200, SM16B, SM08B, PC200 Manual Number Dialling Direct Transmission

Sending Documents

Direct Transmission

If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.

Manual Number Dialling (Direct Transmission)

To dial the telephone number manually, follow the steps below.

Make sure that the FAX lamp is ON. If not, press to select the "FAX MODE".

1a
		ENTER STATION(S)
		THEN PRESS START 00%
	Place original(s) face up on the ADF.
	or

1b

Place a book or an original face down on the

Platen Glass.

2

3	Make sure that the lamp goes off.
	Enter a telephone number from the keypad.
	Ex: 5 5 5 1 2 3 4
4

Your machine starts to dial the telephone number.

ENTER STATION

THEN PRESS START 00%

Note3

TEL NO.	(AUTO)
5551234❚
* DIALLING *
5551234

NOTE

1.If you need a special access number to get an outside line, dial it first then press (represented by a "-") before dialling the full number.

Ex: 9 PAUSE 5551234

2. To stop the transmission, press STOP . The display shows:

COMMUNICATION STOP? 1:YES 2:NO

PAUSE

to enter a pause

Press 1 to stop the transmission. The Communication Journal will not print out regardless of the printout mode setting of the Communication Journal.

3. This field (AUTO, Line-1 or Line-2) appears only when the 2nd G3 Fax Communication Port Kit is installed.

47