PITCH OFFSET
± 00mm
The label Pitch distance from the leading edge (the edge that comes out ofthe printer first) of a label and the leading edge of the next label. The leading edge position of the label can be adjusted relative to the print head +/- 49 mm in increments of 1mm. Once the position is set, it can be fine adjusted +/- 3.75mm using the PITCH potentiometer on the Adjustment Panel.
1.The underline cursor will initially be positioned underneath the Pitch Direction setting. Pressing the LINE key will step the setting to the positive (+) or negative
2.Once the correct direction is selected, pressing the FEED key will accept the setting and advance the cursor to the Offset selection.
3.Use the LINE key to step the first digit of the counter to the desired setting. The display will increment one step each time the LINE k y is pressed. The reading will advance to a s tting of 4 after which it will automatically wrap and start at 0 again.
4.Press the FEED key to accept the s tting a d
advance the cursor to the second igit. Again use the LINE key to step the desired setting. Once it
is correct, pressing the FEED k y will st | to the | |
next adjustment. You may wish to | rint a |
|
label after completing the adjustme | ts | sure |
they are correct. |
|
|
