Panduit PTR3E manual Replacing The Print Head, Open the Top and Side Access doors

Section 4: Cleaning and Maintenance

REPLACING THE PRINT HEAD

The print head on the PTR3E printer is a user-replaceable item. If it becomes damaged for any reason, it can be easily removed and replaced. Contact Technical Support for information on obtaining a new print head.

Supplies needed:No. 2 Phillips screwdriver (a magnetic tip is helpful), Replacement Print Head (available through Panduit Printer Repair Department)

1.Turn the printer OFF and remove the power cable.

2.Open the Top and Side Access doors.

3.Open the Print Head by pushing the Head Latch toward the rear of the printer. The Print Head is spring-loaded and will automatically open as soon as the Head Latch is disengaged.

4.Remove the ribbon from the Ribbon Rewind Spindle if necessary.

5.Remove the Label Cover Assembly by removing the securing screw from the assembly.

Label Cover securing

screw

Label Cover

43