AUTO ONLINE FEED
YES NO
FEED ON ERROR
YES NO
REPRINT W/FEED
YES NO
FORWARD/BACKFEED DISTANCE DEFAULT
FORWARD/BACKFEED DISTANCE XXXmm
EURO CODE
D5
SELECT LANGUAGE ENGLISH
32
This selection specifies whether or not the printer will automatically feed a blank label when it is placed in the Online mode.
1.Use the LINE key to step the cursor to desired setting. If Yes is selected, the printer will feed a blank label anytime it enters the Online mode. If No is selected, the display will advance to the mode display.
This selection specifies whether or not the printer will feed a
blank label automatically when an error condition is cleared...
1.Use the LINE key to step the cursor to desired setting. If Yes is selected, the printer will feed a blank label anytime an error condition is cleared. If No is selected, the display will advance to the mode display.
This selection specifies whether or not the printer will print the last printed label stored in memory when the FEED key is pressed in the Normal Online mode.
1.Use the LINE key to step the cursor to desired setting. If Yes is selected, the printer will reprint the last label when the FEED key is pressed when the printer is Online. If the printer is Offline, pressing the FEED key will feed a blank label. If No is selected, the display will advance to the mode display.
This display will only appear when the Backfeed is enabled
1.Use the LINE key to select either the Default or the Distance selection. If Default is selected, the display steps to the Web acceleration selection.
2.If Manual setting is selected, use the LINE key to advance the distance to the desired setting. Each time the LINE key is pressed, the Distance will advance 1 mm. The maximum distance is 255mm.
3.Once the desired distance is set, press the FEED key to accept the setting and step to the next display.
This selection allows the user to specify the hexidecimal code for the character which is replaced with the Euro Character. The default is D5H.
1.The underline cursor should be positioned underneath the first digit selection. Use the LINE key to step to the desired setting.
2.Press the FEED key to advance the underline cursor to the second digit of the desired hexidecimal code.
3.Press the LINE key to step to the desired setting.
4.When the setting is correct, press the FEED key to accept the setting and step to the next display.
This selection allows the user to select the character set used by the printer. The selections are English, French, German, Spanish Italian and Portuguese. The default is English.
1.Press the LINE key to advance to the desired language setting.
2.When the setting is correct, press the FEED key to accept the setting and step to the next display.
