ParaBody 425103 manual Cable has been routed

94	93
93	89 1/2 X 4-1/2”
26	6
25	53
FIGURE 27

STEP 27

•SECURELY assemble the BEARING HOUSING (6) and the CENTER PULLEY BRACKET (26) to the FRONT UPRIGHT (25) using two 1/2 X 4-1/2” BOLTS (89) , four 1/2” WASHERS (93), and two 1/2" LOCK NUTS (94). See FIGURE 27.

•Attach two 1 X 1" GUIDES (53) to the ANGLE on the UNDERSIDE of the BEARING HOUSING (6). See FIGURE 27.

		84 3/8 X 2”		STEP 28
		91 45		• LOOSELY assemble two 3-1/2” PULLEYS (42) to the
			42	CENTER PULLEY BRACKET (26) using two 3/8 X 2”
				BOLTS (84), two 2-3/8” L-BRACKETS (45), four 3/8”
				WASHERS (91), and two 3/8” LOCK NUTS (92). See
				FIGURE28.
				(NOTE: This connection wil be tightened after the
		26		cable has been routed.)
			91
			92
FIGURE 28
1/2	1/2	1/2	3	1/2	1/2	1/2
0	1	2		4	5	6
			24