Paradyne 4800 Express manual Unpacking the Hardware, Package Contents

1. Installation

Unpacking the Hardware

HANDLING PRECAUTIONS FOR

!STATIC-SENSITIVE DEVICES

This product is designed to protect sensitive components from damage due to electrostatic discharge (ESD) during normal operation. When performing installation procedures, however, take proper static control precautions to prevent damage to equipment. If you are not sure of the proper static control precautions, contact your nearest sales or service representative.

The BitStorm 4800 Express is shipped in a cardboard shipping container. Carefully remove the unit from its shipping container and check for physical damage. If the unit shows signs of shipping damage, notify your sales representative.

Package Contents

In addition to this installation guide, the BitStorm 4800 Express shipping carton should contain:

„BitStorm 4800 Express DSLAM

„AC Power Cable

„Two sets of mounting brackets: one set suitable for a 19-inch (483 mm) rack and one set suitable for a 23-inch (584 mm) rack (including Bay Networks and Nortel)

„Hardware kit (see Table 1-3, Contents of Hardware Kit Shipped with the BitStorm 4800 Express)

If anything is missing, notify your sales representative.

Before installing the BitStorm 4800 Express, read the Important Safety

Instructions in the beginning of this document.

Be sure to register your warranty at www.paradyne.com/warranty.

1-4 July 2004 4821-A2-GN21-10