Manuals / Paradyne / Computer Equipment / Network Router

Paradyne manual Installing the BitStorm 4800 Express on a Wall, 1-10, Procedure

Models: 4800 Express

1 52

Download 52 pages 57.01 Kb

Page 20

Image 20

1. Installation

Installing the BitStorm 4800 Express on a Wall

Wall mounting requires two wood screws suitable for the weight of the fully cabled unit. These are not included. Use at a minimum 1/4-inch (6 mm) diameter screws in 3/4-inch (19 mm) plywood (not drywall).

Procedure

To install the BitStorm 4800 Express on a wall:

1.Identify the flat-head screws provided in the hardware kit and the brackets suitable for a 23-inch rack. Two screws are required for each bracket.

2.Orient the unit so that the bottom is facing you and the faceplate is at the top.

3.Locate the supplied Right Side mounting bracket and fasten it to the right side of the unit.

04-17527

4.Locate the supplied Left Side mounting bracket and fasten it to the left side of the unit.

5.Tighten all screws firmly.

1-10

July 2004

4821-A2-GN21-10

Page 20

Image 20

Paradyne manual Installing the BitStorm 4800 Express on a Wall, 1-10, Procedure

Contents

Model 4821-A2 Installation Guide BitStorm 4800 ExpressDocument No. 4821-A2-GN21-10 JulyWarranty, Sales, Service, and Training Information Copyright 2004 Paradyne Corporation All rights reservedPrinted in U.S.A Document FeedbackSoftware and Firmware License Agreement Important Safety Instructions EMI Notices UNITED STATES - EMI NOTICE CANADA - EMI NOTICEJapan Notices to Users of the Canadian Telephone NetworkCE Marking Contents 1 InstallationAbout This Guide 2 CablingB Equipment List C Technical Specifications Index 4 ConfigurationA Connectors and Pin Assignments About This Guide Document Purpose and Intended AudienceDocument Summary Chapter 1, InstallationRelated Product Documents Document NumberDocument Title 4821-A2-GB21Installation Table 1-1. BitStorm 4800 Express Models and FeaturesOverview Model Number„ Installation Site „ Installation Options„ Power PreparationConnector Name Connector and CableFor Connecting Cables RequiredUnpacking the Hardware Package ContentsHANDLING PRECAUTIONS FOR STATIC-SENSITIVE DEVICES Quantity AppearanceDescription Mounting Configurations ProcedureInstalling the Brackets for Rack Mounting Three basic installation configurations are available23-inch 584 mm EIA and Bay Networks 23-inch 584 mm NortelInstalling the BitStorm 4800 Express Into a Rack ProcedureALARM 04-17526CONSOLE DSL PORTS DSL PORTSProcedure Installing the BitStorm 4800 Express on a Wall1-10 1-11 17.85 in 453 mmProcedure Installing the BitStorm 4800 Express on a Shelf or Desktop1-12 „ 10/100BaseT Uplink Port 2 on page „ Management Port on page „ Connecting to Power on pageCabling Cabling OverviewDSL Ports Procedure10/100BaseT Uplink Port ProcedureManagement Port ProcedureEthernet Switch PortProcedure Connecting a Terminal or PC to the Console PortConsole Port Connecting a Modem to the Console Port ProcedureGround Procedure2. Remove the screw marked by the ground symbol 3. Fasten the ring terminal to the front panel using the same screwConnecting to Power ProcedureLEDs LED LocationsFigure 3-1. Front Panel LEDs PORT1 PORT2 CONSOLE 10/100BT 10/100BT TEST ALARMLED Meanings Table 3-1. Front Panel LEDsColor StateConfiguration OverviewUsing the CLI Configure Management Default Gateway AddressTable 4-1. CLI Commands CommandConfigure Management Inband Address Configure Management Out-of-Band Addressconfigure management inband address ipaddress subnetmask PDYN# configure management inband address 137.90.127.3BitStorm 4800 Express Startup Procedure LoginManagement Modes ProcedureStartup Procedure for Inband Management Startup Procedure for Out-of-Band ManagementProcedure ProcedureUsing the Web Interface ProcedureSystem / Users ProcedureConfiguration / Management / SNMP ProcedureConnectors and Pin Assignments „ DSL Ports Connectors on page A-2„ Port 1 and Port 2 10/100BaseT Connectors on page A-3 „ Console Port Connector on page A-4DSL Ports Connectors Table A-1. DSL Connector PinoutsConnector Pins DSL PortTable A-2. Port 1 and Port 2 Pinouts Port 1 and Port 2 10/100BaseT ConnectorsSignal Console Port Connector Table A-3. Console Port ConnectorRS-232 Signal DirectionEquipment List Table B-1. BitStorm 4800 Express Equipment ListDescription Model Number4821-A2-GN21-10 B. Equipment ListJuly Technical Specifications Table C-1. BitStorm 4800 Express Technical SpecificationsSpecifications Criteria4821-A2-GN21-10 C. Technical SpecificationsJuly IN-1 IndexNumerics Page IN-3 IN-4 IndexJuly 4821-A2-GN21-10