1. Installation
Cables Required
Table
Table 1-2. Cable Descriptions
Connector Name | Connector and Cable | For Connecting . . . |
|
|
|
DSL PORTS | Up to 24 DSL ports per cable to | |
| straight connector and | a POTS splitter. |
DSL Ports | cable. Two cables required for |
|
(if installed) |
| |
|
|
|
Port 2 | The BitStorm 4800 Express to a | |
10/100BaseT | network. | |
| unshielded twisted pair (UTP) |
|
| cable. |
|
|
|
|
Port 1 | A Network Management System | |
10/100BaseT | (NMS) over a Local Area | |
| unshielded twisted pair (UTP) | Network (LAN) employing |
| cable. | 10BaseT or 100BaseT. |
|
|
|
CONSOLE | DB9 plug connector and | The BitStorm 4800 Express to |
| shielded cable. | one of the following: |
| The other connector | A terminal or a PC with a |
| depends on the serial port on | terminal emulation program, |
| your terminal or PC, but | or |
| normally is a DB9 socket. |
|
| The other connector | A modem. |
| depends on the serial port on |
|
| your modem, but normally is |
|
| a DB25 plug. A null modem |
|
| (crossover) cable is required. |
|
|
|
|
July 2004 |